R410A

R410A is used in domestic and light air conditioning equipment. R410A's low glide also makes it suitable for some centrifugal compressors, and it can operate in low temperature applications. As a HFC blend designed for new R22 applications, it operates at higher pressures than many other refrigerants, and so cannot be used to retrofit R22 systems. Systems designed for R410A can take advantage of its ability to use smaller components.

Applications

It is used as a refrigerant in:

  • Domestic and commercial air conditioning systems.

  • Heat pumps

  • Dehumidifiers

  • Refrigerators

  • Other HVAC applications.

Due to the high cooling capacity and pressures of R-410A, it should not be used as a substitute for R-22.


Product Features and Benefits

  • Substitute for R22 and R13B1

  • Near azeotropic refrigerant blend containing R32 and R125

  • Refrigerant must be charged from the liquid phase to ensure accurate composition

  • PVCK refrigerant cylinders have dual port valves, making liquid off-take easier

  • Non-flammable with a safety classification of A1

  • Compressors must be charged with polyester oils, contact the compressor manufacturer for more information

  • Distinct higher efficiency in comparison with R22

  • Not a retrofit replacement due to much higher operating pressures

  • Higher pressures of this refrigerant are to be considered, especially with regards to system components

Physical Property

  • 72.58
  • -51.6
  • 72.5
  • 4.95
  • 1.78
  • 0
  • 2000

Quality Index

  • ≥99.8
  • ≤10
  • ≤1
  • ≤100
  • Colorless, No turbid
  • No Strange Stench

Packaging

  • Disposable cylinder 25lb/11.3kg

  • Recyclable cylinder 926L

  • ISO-Tank.

For optimal performance and compatibility, PVCK recommends the use of valve fittings that have plastic sealing washers (e.g. Nylon, PTFE or PCTFE) for refrigerant products. Hard or inflexible materials such as fiber washers may cause minor connection leaks. The sealing washer should be visually inspected for damage or wear before each use. Fittings should be installed slightly tighter than hand-tight.

For alternative or larger package sizes please contact PVCK on +84 283 636 8171 or via the Contact Us form